الکترود استیل PHILARC

 نماینـــــده رسمــــی الکتــــرود های استیـــل و چــــدن فیــــلارک اطــــریش در ایــــران

1. الکترود استیل فیلارک PHILARC 308L

 
 WS Specification : AWS A5.4 E308L-16

 JIS Specification: D 308L-16

 Other Specif ication: NONE

 I. APPLICATIONS:

 Fabrication of stainless steel structures and assemblies such as plate, pipework, vessels, tanks, forgings and castings in the chemical, petrochemical, power and pharmaceutical industries, food, drink and paper processing plant.

 Highly recommended for general repair work and fabrication of stainless steel equipment such as containers, tanks, vats, and other equipment used in the dairy, chemical and food industries. Also ideal as protective overlay on steel where medium hardness and complete corrosion resistance is required.

II. DESCRIPTION:

A general purpose stainless steel Shielded Metal Arc Welding electrode for welding 18/8 austenitic stainless steels. PHILARC 308L-16 deposits a low carbon 18% Cr-8% Ni weld metal to provide good corrosion resistance properties to intergranular attack from a range of liquid chemical media at service temperatures up to 300ºC. Welds with a smooth even metal transfer and stable arc, and is practically spatter free. Finely-ripped bead and self-peeling slag. Easy welding in all positions. The striking and restriking of the electrode is remarkably easy. A self releasing slag and the risk of porosity in the weld is minimal provided the electrode is dry. The finished welds exhibit a slightly concave shape with good cosmetic appearance which requires little or no post weld dressing. The electrode is ideal for both fillet and butt welding applications. The smaller sizes including 3.25mm are suitable for positional welding while the bigger sizes are for flat only.

III. NOTES ON USAGE:

Prepare and fit the work carefully, cleaning the joints of all foreign material. Use AC (minimum OCV of 70V) or DC+ current. Proceed with the lowest current possible and short arc without allowing coating to touch molten pool. Short and intermittent welding is to be preferred to avoid overheating and distortion. Avoid excessive weaving. Electrodes should be coated. Discard exposed core wire by striking or scratch welding in a scrap plate until exposed core wire is consumed. Use dry electrodes to prevent blowholes in deposit. If necessary re-dry at 200ºC for 2 hours before use.

IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

VI. WELDING POSITIONS:ALL POSITION-EXCEPT VERTICAL DOWN

VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

APPROVAL: ABS

    نماینده رسمی الکترود های استیل و چدن فیلارک اطریش در ایران

 2. الکترود استیل فیلارک PHILARC 309L

 WS Specification : AWS A5.4 E309L-16

 JIS Specification: BS 2926 23.12 L.AR

 Other Specif ication: DIN 8556 E 23 12 LR 23

I. APPLICATIONS:.

 Welding of AISI309S and heat resisting cast steel. First-layer welding of stainless clad steel, for corrosion resistant build-up welding of mild steel.

II. DESCRIPTION:

 PHILARC 309Lis a lime-titania type electrode, which gives extra low carbon25% Cr-12% Ni austenitic weld metal virtually free from spatter. Because of extra low carbon content, the deposited metal has more excellent resistance to the intercrystalline corrosion than that of ordinary 309 type. Peeling-off of the slag is very good.

III. NOTES ON USAGE:

 It is necessary not to use excessive current in order to prevent the dilution from base metal in the case of welding of dissimilar metals and clad steel.

 IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

VI. WELDING POSITIONS: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD

 VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

 APPROVAL: ABS

   نماینده رسمی الکترود های استیل و چدن فیلارک اطریش در ایران

3. الکترود استیل فیلارک PHILARC 310L

AWS Specifiction : AWS A5.4 E310-16

 JIS Specification: JIS D 310-16

 Other Specification: DIN 8556: E 2520 B 20t

 I. APPLICATIONS:

Fabrication of stainless steel structures and assemblies in the

chemical, petrochemical, power industries.

II. DESCRIPTION:

A rutile coated manual metal arc electrode for the welding of 310 austenitic stainless steel. PHILSTAIN 310 deposits 25%Cr-20% Ni weld metal which offers high temperature ductility and excellent resistance to oxidation at working temperatures of up to 1200ºC. PHILSTAIN 310 produces a smooth, even metal transfer with low spatter and a self releasing slag. The finished welds exhibit a slightly concave shape with good cosmetic appearance which requires little or no post weld dressing. The electrode is ideal for both fillet and butt welding applications. The smaller diameter electrodes can be used for vertical up and overhead welding.

Suitable for use with AC (minimum OCV of 70V) and DC+.

 III. NOTES ON USAGE:

 Prepare and fit the work carefully, cleaning the joints of all foreign material. Use AC (minimum OCV of 70V) or DC+ current. Proceed with the lowest current possible and short arc without allowing coating to touch molten pool. Short and intermittent welding is to be preferred to avoid overheating and distortion. Avoid excessive weaving. Electrodes should be coated. Discard exposed core wire by striking or scratch welding on a scrap plate until exposed core wire is consumed. Use dry electrodes to prevent blow hole in deposit. If necessary re-dry at 300ºC for 2 hours before use.

IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

VI. WELDING POSITIONS:ALL POSITIONS

VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

 نماینده رسمی الکترود های استیل و چدن فیلارک اطریش در ایران

4. الکترود استیل فیلارک PHILARC 316L

AWS Specification: AWS A5.4 E316L-16

 JIS Specification: JIS D 316L-16

 Other Specification: DIN 8556: E 19.12.3 LR 23

I. APPLICATIONS:

 Fabrication and repair of textile and other dyeing equipment, paper mill tanks, chemical tanks and equipment, pickling tanks, salt processing equipment, alkali tanks, etc.

II. DESCRIPTION:

 Stainless steel Shielded Metal Arc Welding electrode with coating for welding 18/8/Mo stainless steels, AISI 316, 316L and 317 austenitic stainless steel. Austenitic and corrosion-resistant weld deposit of low carbon 19% Cr-12% Ni-2.8% Mo insures against intergranular carbide circuit voltage of 70 volts. The finished welds exhibit a slightly concave shape with a good cosmetic appearance which requires little or no post weld dressing. The electrode is ideal for both fillet and butt welding applications.

III. NOTES ON USAGE:

     Prepare  all fit the work carefully, cleaning the joints of all foreign material. Use Ac (minimum OCV of 70V) or DC+ current. Proceed with the lowest current possible and a short arc without allowing coating to touch molten pool. Short and intermittent welding is to be preffered to avoid overheating and distortion. Avoid excessive weaving. Electrodes should be coated. Discard exposed core wire by striking or scratch welding in scrap plate until exposed core wire is consumed. Use dry electrodes to prevent blowholes in deposit. If necessary re-dry at 200ºC for two (2) hours before use.

IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

VI. WELDING POSITIONS: ALL POSITION-EXCEPT VERTICAL DOWN

 VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

نماینده رسمی الکترود های استیل و چدن فیلارک اطریش در ایران